VR6 I-Beam Conrods for 5/16" bolts 164x20mm BAR-TEK®

High-strength steel connecting rods with I-Beam for VR6 engines

The connecting rods of your tuned VR6 engine have to withstand a lot if you want an extreme performance boost. Here, very intense forces are exerted, for which the engines unfortunately are no match. In order to prevent the connecting rods from tearing, you should thus turn to our high-strength, 164x20 mm steel connecting rods with I-beam for VR6 12V and V6 24V engines. They are milled from solid metal, thus extremely robust and yet very lightweight. This makes it to the perfect connecting rod set for your tuning project!

This makes our VR6 connecting rod perfect for high performance

• high-strength, milled from solid metal
• suitable for big performance boosts
• extremely lightweight and very stable
• incl. 5/16" ARP bolts
• 6 pieces per set

The steel connecting rods are suitable for VW VR6 12V and V6 24V engines with 164-×-20-mm connecting rods.

(sample image)

Installing VR6 connecting rod correctly

In order to ensure you are safely on the move at all times, your VR6 connecting rods should be installed correctly. It is important for the connecting rod bolts to be tightened professionally. We explain how this works on the info page for correctly tightening connecting rod bolts. If you want to play it safe and only let pros look at your connecting rods, we will tend to the installation for you. Just contact us and arrange an appointment.

More information on how to properly tighten the connecting rod bolts