1.8T Engine Tuning Guides
Tuning Guides
Tuning-Guide for 1.8T APP, ARY, AUQ engines with 180 hp
From 180 hp up to 666 hp with your 1.8T engine!
Professional tuning guide for 1.8T engines with 180 hp
180 hp in an A3 or TT isn’t bad, but would you like to know what else you could get out of your 1.8T? With our tuning guide, you can get it up to as much as 666 hp, safely and professionally. We show you all the parts and steps you need to have even more fun with your car.
Installed in:
- Audi A3
- Audi TT
Year of manufacture:
1999 – 2000
Engine Code:
- APP
- ARY
- AUQ
Stage 1
increased efficiency:
+ 30 hp
+ 100 Nm
Final output:
210 hp
335 Nm
You need this extra to make it last:
You don't need any additional components here. Simply install and have fun!
BAR-TEK® TIP!
BAR-TEK® tips!
We recommend filling up with 102 octane fuel. This will give your engine more power because it knocks less! The engine should be in good condition and the turbocharger should not be too old. To reduce coking to a minimum and keep the engine clean, we recommend installing our oil catchtank kit with TÜV.
BAR-TEK® tips!
We recommend filling up with 102 octane fuel. This will give your engine more power because it knocks less! The engine should be in good condition and the turbocharger should not be too old. To reduce coking to a minimum and keep the engine clean, we recommend installing our oil catchtank kit with TÜV.
Stage 2
increased efficiency:
+ 55 hp
+ 110 Nm
Final output:
235 hp
345 Nm
You need this extra to make it last:
To bring the extra power on the road, you need a sport clutch, because the original can not transfer the power. For the conversion to K04-01 upgrade turbocharger you have to install a 3" downpipe and our upgrade air mass meter.
BAR-TEK® TIP!
We recommend that you buy the Level 3 Kit right away. With the level 2 kit, without modified injectors and upgrade manifold, the performance gain compared to chip tuning is not quite as high. This is because the 180 hp 1.8T engine already has a slightly larger turbocharger.
We recommend that you buy the Level 3 Kit right away. With the level 2 kit, without modified injectors and upgrade manifold, the performance gain compared to chip tuning is not quite as high. This is because the 180 hp 1.8T engine already has a slightly larger turbocharger.
Stage 3
increased efficiency:
+ 100 hp
+ 150 Nm
Final output:
280 hp
385 Nm
You need this extra to make it last:
Also here you need a sports clutch, because the original one can't transfer the power. For the conversion to K04-01 upgrade turbocharger you have to install a 3" downpipe and our upgrade air mass meter.
BAR-TEK® TIP!
With the tuning kit stage 3 you have the extended extension stage of the kit 2. Here you have 380 ccm injectors and an upgrade manifold as well as an again optimized software! If you have already installed a downpipe, an intake hose and an upgrade intercooler, you can continue to use them. With an upgrade intercooler you also have the complete power available in summer!
With the tuning kit stage 3 you have the extended extension stage of the kit 2. Here you have 380 ccm injectors and an upgrade manifold as well as an again optimized software! If you have already installed a downpipe, an intake hose and an upgrade intercooler, you can continue to use them. With an upgrade intercooler you also have the complete power available in summer!
Stage 4
increased efficiency:
+ 140 hp
+ 165 Nm
Final output:
320 hp
400 Nm
You need this extra to make it last:
320 hp: That's an announcement! To drive this power, you have to replace your connecting rods with h-beam connecting rods. A sports clutch kit is required to make the 320 hp perfect. For the exhaust you should use a 76 mm exhaust system. For the correct oil temperature, an oil cooler must be installed!
BAR-TEK® TIP!
A good chip tuning is required for this conversion. You can send us your control unit or have your vehicle tuned directly in our dyno. Another tip from us: If you have installed the small 280 mm brake system, this is no longer up to the high performance. You can convert it to a Brembo 4-piston brake or a 320 mm brake (e.g. from the Audi S3).
A good chip tuning is required for this conversion. You can send us your control unit or have your vehicle tuned directly in our dyno. Another tip from us: If you have installed the small 280 mm brake system, this is no longer up to the high performance. You can convert it to a Brembo 4-piston brake or a 320 mm brake (e.g. from the Audi S3).
Stage 5
increased efficiency:
+ 486 hp
+ 573 Nm
Final output:
666 hp
808 Nm
You need this extra to make it last:
We'll tell you what you need for 666 hp here shortly.
Cooling guide
increased efficiency:
Final output:
This is how you improve the cooling:
If you want to get the full performance out of your engine, you must not forget the cooling. Even a little extra power puts a lot of strain on your engine! The thermal load increases and affects all areas of your vehicle, even the transmission suffers from the new power. At best, the hard-earned power is reduced again; at worst, your engine suffers major damage. So that you can tune your engine safely and reliably, we provide you with everything you need for perfect cooling. Although it is ideal to install all parts together in a cooling bundle, you don't necessarily have to order everything at once. Each product helps you to improve cooling.
Turbo guide
increased efficiency:
Final output:
The perfect turbocharger for your tuning project
The turbocharger is one of the most important tuning measures of all, as there is huge performance potential in the compression ratio. This is why you will find all the turbos from the guides and suitable alternatives in this special turbo guide, for example if you prefer a specific manufacturer. We have also compiled a lot of information for you on the subject of turbochargers, which you should take a look at. In addition to the detailed turbo tips, there is a page on running in engines correctly, turbo lag and, of course, our 14 turbo rules.
Race engines
increased efficiency:
Final output:
Racing engines from BAR-TEK®
If you don't feel like tuning your engine all by yourself, you can also get a ready-tuned engine from us. Our racing engines are designed for maximum performance and maximum driving pleasure and leave nothing to be desired. The components included are perfectly matched, finely balanced and suitable for the highest speeds. Because we use components from motorsport, such as forged pistons and steel connecting rods, our racing engines are extremely stable. This means you get a completely finished engine that not only delivers full power, but is also safe and has a long service life.
The performances stated here are based solely on our experience, therefore we can only give a reference value. Many factors, such as the fuel used, the software setup and the mileage, play a serious role in the maximum possible performance. Therefore all data are without guarantee. If you would like to put your engine through its paces, we will carry out an exact measurement of the value on our MAHA dynamometer.
Any questions?
We will be happy to help you! For further questions please contact us by phone or e-mail.
All information without guarantee.
His first car was a Polo Mk1 with a 40 Weber twin carburetor and 129 PS (95 kW). His second was an Audi 50. Today Bartek tunes Lamborghinis to 1000 PS (735 kW). Even as a young boy, Bartek disassembled vehicles and put everything back together better. He wrote his high school diploma with oil on his fingers. The trained automotive mechanic with a focus on engines and gearboxes was determined to go into motorsports. In his 10 years in Formal 1, he supervised 73 races, including as engine mechanic for Ralf Schumacher at Toyota. Since 2010, he has dedicated himself fully to his company BAR-TEK® and helps his customers to bring VW and Audi engines to peak performance.
Expert in
Engine
Gearbox
YOUR TUNING EXPERT
BAR-TEK®
–
Your specialist for professional Engine tuning
We love engines, performance and speed. Here you will find everything you need to increase the performance of your engine. Especially the professional engine tuning for VW and Audi is one of our specialties. We are also happy to advise you individually and show you on our dynamometer, what you can get out of your car. In addition, we take over the tuning completely for you. Just give us a call!
Bartek
Bartek
Bartek
Bartek
Europe's No. 1 in engine tuning
Europe's largest store for Audi and VW engine tuning.
Same day shipping
Orders before 12 o'clock go out the same day.
All items are BAR-TEK® proved
All items are tested and checked by us.
15 years of engine tuning experience
Of which 10 years in the top class of motorsports!
BAR-TEK®
up close
This might also interest you
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning guide for 1.8T 20V AMU, APX, BAM engines with 225 hp
With these power levels you can reach up to 666 hp!
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning guide for 1.8T AEB engines with 150 PS
Up to 320 PS: How to tune your 1.8T engine with code AEB
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning guide for 1.8T AGU engines with 150 PS
Maximum power for Golf 4 and A3 with engine code AGU
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning guide for 1.8T AUM, ARX, AQX engines with 150 hp
Pro guide for up to 666 hp power!
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning guide for 1.8T BEX engines
Full power for your Audi A4: Up to 666 hp performance!
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning-Guide for 1.8T APP, ARY, AUQ engines with 180 hp
From 180 hp up to 666 hp with your 1.8T engine!
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning-Guide for 1.8T APY, AMK engines with 210 hp
You can more than double the performance of your Audi S3!
MORE
1.8T Engine Tuning Guides
1.8T Engine Tuning Guides
Tuning-Guide for 1.8T BFB engines with 163 hp
More driving fun with your Audi A4 - up to 666 hp!
MORE