TURBO power amplifier PM5 Brushless for upgrade- fuel pump Torqbyte
- Updateable
- for VAG Group
- VCDS compatible
- Plug & Play
- Description
- Guarantees sufficient low pressure at ALL times
- No overheating possible due to external power supply
- Suitable for VAG vehicles
- Includes upgrade connection cable and adapter
- Does not store any error codes
- Works optimally with the engine control unit (closed-loop PWM signal)
- Also ideal for large turbo upgrades
- 2 pumps can be controlled
- Fully VCDS-compatible
- Can be updated
- Plug & Play (output stage ready set)
- FPCM: 4G0 906 093
- Fuel Sender Top Hat (White): 8K0 919 051
- Fuel Pump Connector: 8K0 973 724
- FPCM: 4M0 906 093
- Fuel Sender Top Hat (Blue): 8V0 919 087
- Note: Requires 8V0 971 727 A Wire Adapter (European Models Only)
- Fuel Pump Connector: 4M0 973 724
- Fits for
- Videos
- Questions about the product
- Reviews
- Blog Posts
- Accesories
High-performance final stage for use with upgrade fuelling pumps for many TFSI and TSI vehicles from the VAG Group.
Above a certain engine output, the low-pressure pump must be replaced with a more powerful one such as e. g. Walbro, DW, Bosch, Aeromotive or our BAR-TEK® pumps. Each of these upgrade pumps has a higher current consumption and the original output stage can reach its limits. Failures can occur, especially at warm outside temperatures.
The PM5 can be completely freely programmed to ensure the right fuel supply at all times.
The PM5 is available in 2 plug-n-play kit options covering the most common brushless VAG applications. Please check your factory FPCM and fuel pump connection or part numbers to ensure you are ordering the correct kit.
Plug-n-Play Wiring Kit for
A4, A5, A6, A7, S4, S5, S6, S7, RS5, RS7, Q5, SQ5
RS3/TT RS (DAZA) - European Spec
Accesories
High-performance final stage for use with upgrade fuelling pumps for many TFSI and TSI vehicles from the VAG Group.
Above a certain engine output, the low-pressure pump must be replaced with a more powerful one such as e. g. Walbro, DW, Bosch, Aeromotive or our BAR-TEK® pumps. Each of these upgrade pumps has a higher current consumption and the original output stage can reach its limits. Failures can occur, especially at warm outside temperatures.
The PM5 can be completely freely programmed to ensure the right fuel supply at all times.
- Guarantees sufficient low pressure at ALL times
- No overheating possible due to external power supply
- Suitable for VAG vehicles
- Includes upgrade connection cable and adapter
- Does not store any error codes
- Works optimally with the engine control unit (closed-loop PWM signal)
- Also ideal for large turbo upgrades
- 2 pumps can be controlled
- Fully VCDS-compatible
- Can be updated
- Plug & Play (output stage ready set)
The PM5 is available in 2 plug-n-play kit options covering the most common brushless VAG applications. Please check your factory FPCM and fuel pump connection or part numbers to ensure you are ordering the correct kit.
Plug-n-Play Wiring Kit for
A4, A5, A6, A7, S4, S5, S6, S7, RS5, RS7, Q5, SQ5
- FPCM: 4G0 906 093
- Fuel Sender Top Hat (White): 8K0 919 051
- Fuel Pump Connector: 8K0 973 724
RS3/TT RS (DAZA) - European Spec
- FPCM: 4M0 906 093
- Fuel Sender Top Hat (Blue): 8V0 919 087
- Note: Requires 8V0 971 727 A Wire Adapter (European Models Only)
- Fuel Pump Connector: 4M0 973 724
Accesories