OBD 2 cable set for MFD28 / MFD32 / MFD32S CANchecked
- 2m cable
- Plug & Play
- Installation in a few minutes
- Description
- OBD connector with 2m cable for connection to a MFD28/MFD32/MFD32S
- The following pins are led from the OBD connector to the display: Positive supply, Ground (Pin 4+5), Can High (Pin 6), Can Low (Pin 14)
- Fits for
- Videos
- Questions about the product
- Reviews
- Blog Posts
- Accessories
- Cutsomers also bought
OBD 2.0 cable for the CANchecked MFD28 / MFD32 / MFD32S displays
The CANchecked OBD II cable for all CANchecked displays. Here the terminal 15 signal (ignition plus) is already taken at the OBD connector internally, that means there is no external power cable out! Thus Plug & Play in a few seconds connectable. So the installation is done in a few minutes and it can show all OBD 2 values on the display! Even stored error codes can be displayed!
Features:
Note: To display up to 50 OBD 2.0 values, you must connect the display to the vehicle with the CANchecked OBD 2.0 cable, then read out the PID's with the display, then enter the PID's via the DBC converter and name them individually and save them on the Micro SD card.
Accessories
Cutsomers also bought
OBD 2.0 cable for the CANchecked MFD28 / MFD32 / MFD32S displays
The CANchecked OBD II cable for all CANchecked displays. Here the terminal 15 signal (ignition plus) is already taken at the OBD connector internally, that means there is no external power cable out! Thus Plug & Play in a few seconds connectable. So the installation is done in a few minutes and it can show all OBD 2 values on the display! Even stored error codes can be displayed!
Features:
- OBD connector with 2m cable for connection to a MFD28/MFD32/MFD32S
- The following pins are led from the OBD connector to the display: Positive supply, Ground (Pin 4+5), Can High (Pin 6), Can Low (Pin 14)
Note: To display up to 50 OBD 2.0 values, you must connect the display to the vehicle with the CANchecked OBD 2.0 cable, then read out the PID's with the display, then enter the PID's via the DBC converter and name them individually and save them on the Micro SD card.
Accessories
Cutsomers also bought