MFD32S Gen.2 Universal 3.2" Display with Shift Flash CANchecked

CANchecked MFD32S, universal 3.2" display incl. shift light in the second generation.
The display can read and display up to 64 values simultaneously incl. shiftlight function.

Works with all CAN-Bus based ECUs and as stand-alone.

The MFD32S with integrated shiftlight! To reach the optimal shift point this shift light is indispensable. Whether on the 1/4 mile, or circuit, or on the street, often there is not the opportunity to constantly look at the tachometer to hit the perfect shift point. This shift flash indicator lights up in ascending colors to signal the optimal shift timing without having to look directly at it! The color sequence can also be customized to suit individual preferences.

The retrofit display shows up to 50 values and is suitable for all freely programmable control units with Can-Bus and many with serial interface. Likewise, the display can be fed with 4 values of external sensors and OBD II. So it is also possible to use it as a stand alone multifunction display. In addition, it has an 8GB SD card for logging while driving. All of the 10 pages can be individually assigned with widgets by the customer.

Features:

• 3.2 inch capacitive touch display
• With integrated shift flash
• 8GB SD card memory
• Up to 10 freely configurable pages
• Connection via Can-Bus and serial interface
• 4 analog inputs for 0 - 5V sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature (with adapter) and boost pressure)
• Switching flash optional (only possible with MFD32S!)
• CAN bus switching
• 1x PWM output
• 1x speed input
• 1x digital output
• Datalogging
• Performance meter (measure times e.g. 100-200 km/h)
• Individual minimum and maximum warning values
• Popup function when exceeding or falling below values
• Screen brightness adjustable

Views:

• 10 pages freely configurable
• up to 17 widgets per page
• 10 different widgets (digital number, bar, speed, single pointer, log, tableswitch, picture (from SD card), number, circle display, Haldex)
• Widgets can be moved and resized via drag'n'drop
• Depending on the widgets color customization possible
• As an alternative, the online configurator is available on the CANchecked website. Here the views can be created in advance and then copied to the SD card using the export function.

Performance Meter:
Time measurement directly integrated in the display. 0-100; 0-200; 150-200, everything is possible. The time is measured via the speed signal from the control unit, optionally also combinable with a 10Hz GPS module.

Logging:
There are four different logging types available:
1. USB: logs live all sensor data via USB
2. SD card: all sensor data are logged to the SD card
3. Debug: all CAN bus data are logged via USB.
4. sDbg: all Can Bus data are stored on the SD card (CAN Bus Logger)
The logviewer is available online to evaluate the log. Just load the log file and use the intuitive interface.

Supported ECUs:
In general all ECUs are supported which have a documented CAN bus or a serial interface. The latter is only possible with optional serial adapters. Mostly the manufacturers deliver a "dbc" file, which is then converted into a .tri file for the display. This can also be done by the customer himself using the DBC converter via the manufacturers website.

Thefollowing ECUs are already implemented:
trijekt (Premium, Bee, trigifant)
Megasquirt 2 and 3
AEM
MaxxECU
Ecumaster EMU (standard with CAN, standard with Can Bus Adapter, Black)
k-data KDFI
UMC1/UMC2
EFIgnition
Microsquirt
EcuMaster EMU (classic with Can Bus Adapter: EMU Black)
AIM generic protocol
LinkECU
Haltech v2
MME ECU481 with Can Bus
SCS Delta GDI4 and Delta
VAG (Audi / VW / Seat)
Van kronenburg KMS MD35 (MP25 with CAN-Bus adapter)
VEMS with serial adapter

Haldex:
The 3.2" display has the ability to regulate the 4motion Haldex control (VAG Gen 1 PQ34 platform). The communication is done via Can-Bus, so no modification of the Haldex is necessary. The control is activated by a license.

Included in delivery:
- CANchecked 3.2 inch display with shift light function
- Micro-SD card adapter
- Quickstart guide
- Connector A, Connector B
- Pre-crimped cables
- Four mounting screws
- 8 GB Micro-SD card (installed)
- Diffuse display foil
- 2x 1K1 pullup resistor (for NTC)
- Additional pins to crimp by yourself

Installation instructions can also be found on the CANchecked website.

The display is configured via the website or via the display setup software (can be found on the CANchecked website under the menu item DSS). The dbc-converter for the Can Bus protocol and the online configurator for the widgets, the latter can also be set via touch...
The temperature range of the display is -10°C to 70°C.
As power supply 12V are needed, optionally also 5V or 24V are possible.

Dimensions
- opening 77 x 54,4 mm
- bezel 95 x 69 mm
- depth 24 mm