CANchecked MFD32 display for your VW Golf 7.
The display can read and display up to 50 values simultaneously. Thanks to the included OBD 2 cable and the vehicle-specific bracket for the Golf 7 ventilation grille, the installation is done quickly and easily.
All OBD 2 values that the engine control unit outputs can be displayed.
For example (expandable at any time): RPM, battery voltage, water temp, intake temperature, ignition angle, ignition angle return per cylinder, knock per cylinder, lambda, enrichment, exhaust gas temperature, N75 antaktung, charge pressure, water temp water cooler, oil temperature, ambient temperature, speed and much more.
The current CANchecked 3.2" display generation has a capacitive touch screen. The retrofit display
is suitable for all freely programmable ECUs with Can-Bus and many with serial interface. The display can also be fed with 4 values of external sensors and OBD II. So it is also possible to use it as a stand alone multifunctional display.
It also has an 8GB SD card for logging while driving. All of the 10 pages can be individually occupied by you with widgets.
Features:
- 3.2 inch capacitive touch display
- OBD 2 values, which the engine control unit outputs, can be displayed
- 8GB SD card memory
- Up to 10 freely configurable pages
- Connection via Can-Bus and serial interface
- 4 analog inputs for 0 - 5V sensors (e.g. oil pressure, fuel pressure, exhaust gas temperature (with adapter) and boost pressure)
- Gear shift flash optional
- Performance meter (measure times e.g. 100-200 km/h)
- Individual minimum and maximum warning values
- Popup function when exceeding or falling below values
- Screen brightness adjustable
Views
- 10 pages freely configurable
- up to 17 widgets per page
- 10 different widgets (digital number, bar, speed, single pointer, log, tableswitch, picture (from SD card), number, circle display, Haldex)
- Widgets can be moved and resized by drag'n'drop
- Depending on the widgets color customization possible
Alternatively, the online configurator is available on the CANchecked website. Here the views can be created in advance and then copied to the SD card using the export function.
Performance Meter:
Time measurement directly integrated in the display. 0-100; 0-200; 150-200, everything is possible. The time is measured via the speed signal from the control unit, optionally also combinable with a 10Hz GPS module.
Logging:
There are four different logging types available:
1. USB: logs live all sensor data via USB
2. SD card: all sensor data are logged to the SD card
3. Debug: all CAN bus data are logged via USB.
4. sDbg: all Can Bus data are stored on the SD card (CAN Bus Logger)
The logviewer is available online to evaluate the log. Simply load the log file and use the intuitive interface.
Supported values:
Many customers always ask: "Which values can I query from my ECU". The answer: " ALL " The ECU manufacturers themselves determine which values are sent via the interface and document them accordingly. Up to 50 sensors can be queried with the display if the manufacturer supports this.
Supported ECUs:
In addition to original OEM OBD2 ECUs, it is also possible to query data from freely programmable ECUs. The scope here is the same as for the standard MFD15 / MFD28 / MFD32.
Haldex:
The display has the ability to regulate the 4motion Haldex control (VAG Gen 1 PQ34 platform). The communication is done via Can-Bus, so no conversion of the Haldex is necessary. The control is activated by a license.
Included in delivery:
vehicle specific bracket for ventilation grille (Golf 7)
CANchecked 3.2 inch display
cable set
OBD 2 adapter cable
mounting screws
8 GB Micro-SD card
Micro-SD card adapter
Quickstart Guide
Installation instructions can also be found on the CANchecked website.
The display is configured via the website or via the Display Setup Software (found on the CANchecked website under the DSS menu item). The dbc-converter for the Can Bus protocol and the online configurator for the widgets, the latter can also be set via touch....
The temperature range of the display is -10°C to 70°C.
12V are required as power supply, optionally 5V or 24V are also possible.
