Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
Ideal set of our Race V2 forged pistons and steel connecting rods for your 2.0L TSI of the second and third generation such as e. g. in the Golf 6, Golf 7, Leon Cupra and many more.
With our many years of experience in motorsport and tuning, we can now proudly offer you our exclusively developed high-performance forged pistons in co-operation with MAHLE Motorsport.
Our ambition was to develop a perfect piston specifically for the EA888 engine that can easily withstand power outputs of 600bhp and much more. Specially developed ring zones in combination with improved piston rings enable enormous increases in performance. Thanks to the new piston design, even extreme boost pressures are no longer a problem.
It consists of MAHLE Race V2 forged pistons, high-strength BAR-TEK® ® H-shaft connecting rods and ACL connecting rod bearings. With this combination, you can turn your engine into a stable turbo engine and easily achieve performance levels above any level. As the components harmonise perfectly with each other, you don't have to search as much and save money with this set!
Features of the Mahle Race V2 piston:
new, exclusive piston design especially for 2.0L TSI engines
adapted ring zones and improved piston rings
Low running clearance possible thanks to special alloy
Smooth engine running even in cold start phase
High performance piston pin 21mm
Ideal compression ratio of 9.5:1 and optimum piston shape for EA888 engines
For standard bore 82.50mm or 1st oversize 83.00mm
Low blowby due to special ring zones
Anti-friction graphite coating
Features h-beam conrods:
high-strength milled from solid material
suitable for extreme performance increases
extremely light and very stable
Magnaflux inspected
4 pieces per set
With ARP 2000 expansion bolts 3/8"
21 mm piston pin
ARP assembly paste
Weight per conrods with screws only 565 g
Made in USA
Features ACL connecting rod bearing:
Racing bearing
Coated
Extra bore for piston pin
Here is our video on the correct installation of conrods & connecting rod bolts:
Ideal set of our Race V2 forged pistons and steel connecting rods for your 2.0L TSI of the second and third generation such as e. g. in the Golf 6, Golf 7, Leon Cupra and many more.
With our many years of experience in motorsport and tuning, we can now proudly offer you our exclusively developed high-performance forged pistons in co-operation with MAHLE Motorsport.
Our ambition was to develop a perfect piston specifically for the EA888 engine that can easily withstand power outputs of 600bhp and much more. Specially developed ring zones in combination with improved piston rings enable enormous increases in performance. Thanks to the new piston design, even extreme boost pressures are no longer a problem.
It consists of MAHLE Race V2 forged pistons, high-strength BAR-TEK® ® H-shaft connecting rods and ACL connecting rod bearings. With this combination, you can turn your engine into a stable turbo engine and easily achieve performance levels above any level. As the components harmonise perfectly with each other, you don't have to search as much and save money with this set!
Features of the Mahle Race V2 piston:
new, exclusive piston design especially for 2.0L TSI engines
adapted ring zones and improved piston rings
Low running clearance possible thanks to special alloy
Smooth engine running even in cold start phase
High performance piston pin 21mm
Ideal compression ratio of 9.5:1 and optimum piston shape for EA888 engines
For standard bore 82.50mm or 1st oversize 83.00mm
Low blowby due to special ring zones
Anti-friction graphite coating
Features h-beam conrods:
high-strength milled from solid material
suitable for extreme performance increases
extremely light and very stable
Magnaflux inspected
4 pieces per set
With ARP 2000 expansion bolts 3/8"
21 mm piston pin
ARP assembly paste
Weight per conrods with screws only 565 g
Made in USA
Features ACL connecting rod bearing:
Racing bearing
Coated
Extra bore for piston pin
Here is our video on the correct installation of conrods & connecting rod bolts:
