electronic boost pressure sensor 4,5 Bar / 65 Psi CANchecked

Electronic charge pressure Sensor up to 4,5 Bar / 65 Psi

Fits numerous displays and gauges, MFD28, MFD32, Zada Tech, free injection systems.
The CANchecked charge pressure sensor is compatible with all CANchecked displays and numerous other displays and gauges or free programmable fuel injection systems! Unlike other vendors, this sensor can display boost pressures up to 4.5 Bar / 65 Psi!

Features:

• Up to a maximum of 4,5 Bar / 65 Psi
• With connector and connection pins to crimp yourself
• Works with all displays / indicators / free-programmable injection systems where the characteristic curve can be stored individually

Thefollowing ECUs have already been tested:
trijekt (Premium, Bee, trigifant)
Megasquirt 2 and 3
k-data KDFI
UMC1/UMC2
EFIgnition
Microsquirt
EcuMaster EMU (classic with Can-Bus Adapter: EMU Black)
AIM generic protocol
LinkECU
Haltech v2
MME ECU481 with Can Bus
SCS Delta GDI4 and Delta
VAG (Audi / VW / Seat)
Van kronenburg KMS MD35 (MP25 with CAN-Bus adapter)
VEMS with serial adapter

Scope of delivery:

- 4,5 Bar charge pressure sensor
- Connector
- Pins to crimp for cable

Pin assignment of the connector on the sensor to the MFD28 / MFD32:
5V -> A2
Ground -> A6
Signal -> A8

0-5V characteristic:
0V = -1.3 BAR
5V = 6.77 BAR