Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
Ideal Set of Forged Pistons and Conrods for 2.5L TFSI Engines
With this kit, you get the perfect combination of forged pistons, H-beam steel con-rods and ACL con-rod bearings for your 2.5L TFSI. All components harmonize ideally with one another. You don’t have to search any longer and can even save money!
With our many years of experience in motorsport and tuning, we can now proudly offer you our exclusively developed high-performance forged pistons in cooperation with MAHLE Motorsport.
Our ambition was to develop a perfect piston especially for the EA855 engine, which easily withstands performances of 700PS and much more. Specially developed ring zones, in combination with improved piston rings, enable enormous increases in performance. Thanks to the new piston design, high boost pressures are no longer a problem even with the aluminum block.
Suitable for your 2.5L TFSI engine as installed in the Audi RS3 and TT RS, the set includes high-quality forged pistons by MAHLE. They have a special alloy and thus allow for reduced movement and a quiet engine running even in the cold start-up phase. The combination of our H-beam steel con-rods with the MAHLE pistons is absolutely perfect. The con-rods have been milled from a solid block, which makes them 100% stable and extremely lightweight. This is why they are the perfect con-rods for the ambitious tuning of your 2.5L TFSI engine.
Features of the pistons:
new, exclusive piston design especially for 2.5L TFSI engines
Specially designed ring zones and improved piston rings
Low running play possible thanks to special alloy
Quiet engine running even in the cold start phase
High performance piston pin 21mm
Ideal compression of 9.5:1 and optimal piston shape for 2.5L TFSI engines
For standard bore 82.50mm
Low blowby due to special ring zones
Anti-friction graphite coating
Features of the H-beam con-rods:
Original BAR-TEK
high-strength and milled from a solid block
suitable for extreme increases in performance
extremely lightweight and very stable
Magnaflux inspected
5 units per kit
With ARP 2000 3/8” stretch bolts
ARP fitting grease
With an additional hole for piston pin greasing
Features of ACL con-rod bearings:
Race bearings
Coated
Extra bore for piston pin
Of course you can also install the Race V2 pistons in the old 5 cylinder (CEPA, CEPB and CZG)
The specified compression ratio is valid in combination with a cylinder-head gasket in standard thickness.
Ideal Set of Forged Pistons and Conrods for 2.5L TFSI Engines
With this kit, you get the perfect combination of forged pistons, H-beam steel con-rods and ACL con-rod bearings for your 2.5L TFSI. All components harmonize ideally with one another. You don’t have to search any longer and can even save money!
With our many years of experience in motorsport and tuning, we can now proudly offer you our exclusively developed high-performance forged pistons in cooperation with MAHLE Motorsport.
Our ambition was to develop a perfect piston especially for the EA855 engine, which easily withstands performances of 700PS and much more. Specially developed ring zones, in combination with improved piston rings, enable enormous increases in performance. Thanks to the new piston design, high boost pressures are no longer a problem even with the aluminum block.
Suitable for your 2.5L TFSI engine as installed in the Audi RS3 and TT RS, the set includes high-quality forged pistons by MAHLE. They have a special alloy and thus allow for reduced movement and a quiet engine running even in the cold start-up phase. The combination of our H-beam steel con-rods with the MAHLE pistons is absolutely perfect. The con-rods have been milled from a solid block, which makes them 100% stable and extremely lightweight. This is why they are the perfect con-rods for the ambitious tuning of your 2.5L TFSI engine.
Features of the pistons:
new, exclusive piston design especially for 2.5L TFSI engines
Specially designed ring zones and improved piston rings
Low running play possible thanks to special alloy
Quiet engine running even in the cold start phase
High performance piston pin 21mm
Ideal compression of 9.5:1 and optimal piston shape for 2.5L TFSI engines
For standard bore 82.50mm
Low blowby due to special ring zones
Anti-friction graphite coating
Features of the H-beam con-rods:
Original BAR-TEK
high-strength and milled from a solid block
suitable for extreme increases in performance
extremely lightweight and very stable
Magnaflux inspected
5 units per kit
With ARP 2000 3/8” stretch bolts
ARP fitting grease
With an additional hole for piston pin greasing
Features of ACL con-rod bearings:
Race bearings
Coated
Extra bore for piston pin
Of course you can also install the Race V2 pistons in the old 5 cylinder (CEPA, CEPB and CZG)
The specified compression ratio is valid in combination with a cylinder-head gasket in standard thickness.
