Easily improve your vehicle's fuel economy, durability and environmental performance. RVS TECHNOLOGY® is proven to protect friction surfaces and equipment from wear. The GIP product cleans, regenerates and protects the fuel pump and injectors. The treatment improves combustion and prevents damage to the fuel pump.
You can easily perform the RVS treatment yourself:
RVS Technology® recommends treating the fuel system when the fuel tank is almost empty. The fuel temperature must be at least +10 °C.
Shake the contents of the bottle thoroughly (20-30 seconds) until the components are completely mixed. Pour the contents of the bottle into the fuel tank.
Run the engine - preferably while driving - until the fuel tank is almost empty. Avoid switching off the engine during this time. Top up with fuel and drive the vehicle normally.
Treatment is complete when the vehicle has been driven 300-500 km after treatment.
For best results, treat your vehicle's engine with RVS Technology® Engine Protection & Restoration beforehand.
Manufacturer
Information about the manufacturer
RVS Technology
Oy RVS Technology Ltd
Pulttitie 2, 00880 Helsinki, FINNLAND
vorname.nachname@rvs.fi
Safety and warning instructions
Storing and safety instructions
Store at temperatures below +40 °C (105 °F).
Keep the product out of reach of children.
In case of skin contact, wash with lukewarm water and soap.
If the product gets in your eyes, it may cause irritation – flush with water and consult a doctor if the irritation continues.
If the product is swallowed, rinse mouth with water and consult a doctor. Do not induce vomiting!
In case of fire, any extinguishing materials except water can be used.
