Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
Our team of experienced motorsport professionals develops many of our tuning parts themselves in our workshop, "Area 51". Every item is tested and further developed on our internal performance test bench until it meets our high standards. In addition, every new product from external manufacturers also goes through our quality control and only enters the store when we would install it in our own mothers' cars. Our quality and safety standards are permanently increased in this way.
Sturdy steel H-Beam connecting rods for 1.8L TSI engines
H-beam steel connecting rods for all 1.8L TSI engines with chain (EA888) are designed for an extreme performance increase up to 900 hp. This will increase the performance of your Golf Mk7, Audi TT and Co enormously. From a performance of 270 hp you should upgrade to these connecting rods, as the original parts cannot withstand and tear this high load.
Thanks to the H-beam these connecting rods are extremely robust and have a very high torsion resistance. The loads are reduced and distributed to the connecting rod, which is why they are also very crack-resistant. Although they are full of stability, our 1.8L TSI connecting rods are extremely light: every gram counts when it comes to increasing performance.
In order to optimally lubricate the piston pins and protect the engine parts from abrasion, the connecting rods come with an additional drilling (rifle drilled). All Bar-Tek connecting rods are precisely angled and tested. Included are of course 3/8" ARP 2000 expansion bolts and the assembly paste. There are a few things to keep in mind during assembly, so we've summarized some information on how to tighten the connecting rod bolts correctly for you!
Features of our H-Beam connecting rods:
milled from solid material and therefore very robust
suitable for extreme performance increases up to approx. 900 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions. 148 x 21 mm
With ARP 2000 expansion bolts 3/8"
ARP Assembly paste
With additional bore for piston pin lubrication (rifle drilled)
Our connecting rods fit into all engines with 148 x 21mm connecting rods
Do you have questions about the product?Just start the chat, we will help you with your product selection.
Sturdy steel H-Beam connecting rods for 1.8L TSI engines
H-beam steel connecting rods for all 1.8L TSI engines with chain (EA888) are designed for an extreme performance increase up to 900 hp. This will increase the performance of your Golf Mk7, Audi TT and Co enormously. From a performance of 270 hp you should upgrade to these connecting rods, as the original parts cannot withstand and tear this high load.
Thanks to the H-beam these connecting rods are extremely robust and have a very high torsion resistance. The loads are reduced and distributed to the connecting rod, which is why they are also very crack-resistant. Although they are full of stability, our 1.8L TSI connecting rods are extremely light: every gram counts when it comes to increasing performance.
In order to optimally lubricate the piston pins and protect the engine parts from abrasion, the connecting rods come with an additional drilling (rifle drilled). All Bar-Tek connecting rods are precisely angled and tested. Included are of course 3/8" ARP 2000 expansion bolts and the assembly paste. There are a few things to keep in mind during assembly, so we've summarized some information on how to tighten the connecting rod bolts correctly for you!
Features of our H-Beam connecting rods:
milled from solid material and therefore very robust
suitable for extreme performance increases up to approx. 900 hp
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions. 148 x 21 mm
With ARP 2000 expansion bolts 3/8"
ARP Assembly paste
With additional bore for piston pin lubrication (rifle drilled)
Our connecting rods fit into all engines with 148 x 21mm connecting rods
Do you have questions about the product?Just start the chat, we will help you with your product selection.
