Advisor
chip- and motortuning
Seat Leon 3 2.0L TSI EA888 Cupra 290 (290 PS) | CJXH | Year 11.2015 - 02.2017
Tell us the model and engine of your car and we will show you your perfect tuning!
Seat Leon 3 Cupra 290
You have chosen an excellent vehicle for engine tuning with the Seat Leon 3 Cupra 290. It is perfectly suitable for performance enhancement, because the tuning parts have already been tested and perfected by us for years.
BAR-TEK® Motorsport
BAR-TEK® Motorsport is Europe's largest engine tuning store for VW and Audi performance upgrades and is run by a former racing professional with 10 years of Formula 1 experience. With him, your car is in the best hands.
The procedure for increasing the performance of your Seat depends on your budget, your time and your desire for more power. All in all, there are the following adjustments that we can make to increase the performance of your Seat:
1st Stage: Chip tuning
Simple, cheap, effective
Chip tuning is the first, simplest and cheapest step to increase performance. The manufacturer deliberately leaves "reserves" in the engine performance, which we extract for you. Optimal power, more performance, higher torque (and even less consumption and increased longevity are possible if you choose "Eco-Tuning").
Price
Performance
Effort
Price/Performance
Please note the following
If you have already done other tuning modifications, please let us know. We strongly advise against "standard chip tuning packages" - as often offered on the web - because installing standard chips in already modified vehicles can be expensive later on (!).
The solution
We tune each car individually with our dynamometer. Only a few tuning companies can offer that. Unlike other chip tuning providers, we don't just send you an ECU, but check the before and after performance of your car. This is the only way we can guarantee the increased performance and safety of your car.
2nd Stage: Upgrade Kit V1
"I want more!"
In addition to chip tuning, with the first engine upgrade kit, engine parts, sports clutch, turbocharger, intercooler, fuel pump and racing cat are exchanged for high-end tuning parts.
Price
Performance
Effort
Price/Performance
The OEM parts can not offer more power and would not withstand the increase in power, even in terms of safety. The effort for the upgrade is correspondingly greater than with chip tuning, but that is later also the power of your Seat Leon 3 Cupra with 290 PS!
All parts have been tested by us and our customers for years and the extra performance is regularly proven on the dyno. Imagine you give your car to a Formula 1 tuner. At BAR-TEK®-Tuning you really do. And that's what you get out of it.
3rd stage: Upgrade Kit V2
"I want more!"
In addition to chip tuning, the first engine upgrade kit replaces engine parts, sports clutch, turbocharger, intercooler, fuel pump and racing catalytic converter with high-end tuning parts.
Price
Performance
Effort
Price/Performance
The OEM parts can not offer more power and would not withstand the increase in performance, even in terms of safety. The effort for the upgrade is greater than with chip tuning, but that is later also the performance of your Seat Leon 3 Cupra!
All parts have been tested by us and our customers for years and the extra performance is regularly proven on the test bench. Imagine giving your car to a Formula 1 tuner. At BAR-TEK®-Tuning you really do. And that's what you get out of it.
facts & figures
this is your tuning! How much power would you like?
Standard power
Seat Leon 3 Cupra 290
290 PS/ 213 kW
350 Nm
1.984 cm3
Premium Support
Chip Tuning
Engine Swap
for real tuning pros
YOU want to tune by yourself?
No problem, we've already put together your tuning bundles with all the products you need.
WORKSHOPS
INSTALLATION PARTNERS ALL OVER GERMANY
You can either come to us in Overath (NRW) and bring your car to our workshop or contact us and we will find the nearest service partner for you. Whatever is more comfortable and easier for you!
FAQ - Frequently asked questions
Do I have to have the parts registered with the TÜV (German Technical Inspection Agency)?
Yes, any structural modification must be
approved by a test center. Otherwise your operating license will expire. We
already offer many items with a TÜV certificate, so you can drive in traffic
with confidence. It's best to talk to the TÜV inspector about your project
beforehand and have it approved.
https://www.bar-tek.com/help-center/products-stock/do-i-have-to-have-the-parts-registered-with-the-tuev-german-technical-inspection-agency
Where can I have the upgrade done?
Of course, from us ourselves. Every part can also be installed by us. Should you wish this, simply contact us.
https://www.bar-tek.com/help-center/products-stock/where-can-i-have-the-upgrade-done
Can I install the parts myself or have them installed by a partner?
Many items can be easily installed even without a master craftsman's title. If it should become nevertheless times somewhat more extensive, do not hesitate to ask us. However, we recommend that any conversion work should only be carried out by trained personnel.
https://www.bar-tek.com/help-center/products-stock/can-i-install-the-parts-myself-or-have-them-installed-by-a-partner
Are you unsure? We are happy to help you!
Your answers will be provided by our team!
Create comment
Please leave us a comment.
our promise
Good reasons for BAR-TEK® Motorsport
Seat Leon 3 Cupra 290 tuning since its birth
We tune the Seat Leon 3 Cupra in all variants (body, equipment) and model series since it first came off the production line. The key thing is that a 1.8L or larger gasoline engine is installed. The simple overall concept makes it the ideal vehicle for hobbyists and self-tuners, but also allows professionals like us to really get everything out!
More about us
Parts developed specifically for the Seat Leon 3 Cupra
Over the years, we have already made the Seat Leon 3 Cupra fit for the racetrack in several of our own projects and installed specially developed parts for this purpose and put them to the test. These are only available at BAR-TEK® Motorsport and have also been approved by TÜV. Only in this way can we guarantee maximum performance without sacrificing safety and long driving pleasure.
Our own developments
We know the children's diseases of the Seat Leon 3 Cupra
The Seat Leon 3 often has problems with the chain drive. The chain elongates and wears out. We have identified the fault and specialize in not only fixing it but using it to your advantage. We know all the teething problems of the Leon 3 Cupra 290 and eliminate them professionally and safely in tuning.
To our tuning guides
Europe's No. 1 in engine tuning
Europe's largest store for Audi and VW engine tuning.
Same day shipping
Orders until 12 o'clock go out the same day.
All items are BAR-TEK proved
All items are tested and checked by us.
15 years of engine tuning experience
Of these, 10 years in the top class of motorsport!
