BAR-TEK® 470 cc fuel injector 100 % matched

BAR-TEK^® injector 470cc flow at 3 bar.

When using an upgrade supercharger, these nozzles are essential. Thus no change in fuel pressure necessary! Chip must of course be adjusted. It is also recommended to install an additional fuel pump such as our Pierburg pump.

Technical data:

• 470 cc/min at 3 bar
• 14 ohm (high impedance)
• 4 jet with EV6 design
• Length from O-ring to O-ring start 60 mm
• Made in Germany!

Suitable for many models such as VR6,G60,16v or 1.8T Audi S2 or RS2

Price per nozzle.PLUS: Nozzles are tested in advance with us and paired to each other! So you get perfectly matched nozzles for your engine!

We successfully run these nozzles in our test Golf 1.8T.

More pictures of our test Golf HERE

Even new injectors have a certain spread of the injection amount!
The manufacturers state a tolerance of up to 8 % as "normal". But in the worst case this can lead to incorrect injection quantities per cylinder. As a result, the cylinders get injected different amounts of fuel and the engine does not run clean or it can come to damage to piston or valves! Thanks to our ASNU nozzle test bench, we can also test new injection nozzles and thus pair them optimally with each other. Click here to go directly to our nozzle test bench.

Manufacturer

Information about the manufacturer

BAR-TEK®

BAR-TEK Motorsport GmbH

Im Rauschen Auel 3, 51491 Overath-Brombach, Germany

info@bar-tek.com