We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
We have been working for many years with the leading manufacturers in motorsport, who have placed their trust in us and chosen us as their authorized dealer. Thanks to these strong partners and our mission to constantly raise our standards, we can not only ensure the best quality and conditions for our customers, but also have grown to become the largest online store for motorsport and tuning parts in Europe.
Multi-layer cylinder head gasket with stainless steel sealing rings
Athena presents the new Cut Ring cylinder head gasket for EA888 Gen.3 engines.
Cut Ring gaskets are ideal for turbo engines that run at high boost pressure. These powerful engines require gaskets that can withstand high temperatures and pressures. Athena has therefore developed the only racing gasket available on the market that guarantees maximum sealing under all conditions. The gasket is made from the exclusive Motor Gasket® material and features stainless steel sealing rings that are machined from solid to seal every opening of the cylinder bore even under the highest loads. Motor Gasket® withstands all the stresses of high compression engines and is treated with special anti-stick and anti-wear coatings.
Features:
Bore 83.50 mm
Thickness 1.40 mm
Stainless steel cut rings
New head bolts should be used in any case! Or even better ARP stud bolt.
Note: The rings must be fitted with the grooves facing upwards! The specified bore is always that of the head gasket! This means that the diameter of the bore of your cylinder must always be 0.5 - 1.0 mm smaller than that of the head gasket!
Suitable for all 2.0 TSI EA888 MQB Gen.3 engines with chain.
(Image similar)
With our compression calculator you can easily calculate the compression with different head gasket thicknesses. This allows you to quickly and easily find the right thickness for your engine.
Multi-layer cylinder head gasket with stainless steel sealing rings
Athena presents the new Cut Ring cylinder head gasket for EA888 Gen.3 engines.
Cut Ring gaskets are ideal for turbo engines that run at high boost pressure. These powerful engines require gaskets that can withstand high temperatures and pressures. Athena has therefore developed the only racing gasket available on the market that guarantees maximum sealing under all conditions. The gasket is made from the exclusive Motor Gasket® material and features stainless steel sealing rings that are machined from solid to seal every opening of the cylinder bore even under the highest loads. Motor Gasket® withstands all the stresses of high compression engines and is treated with special anti-stick and anti-wear coatings.
Features:
Bore 83.50 mm
Thickness 1.40 mm
Stainless steel cut rings
New head bolts should be used in any case! Or even better ARP stud bolt.
Note: The rings must be fitted with the grooves facing upwards! The specified bore is always that of the head gasket! This means that the diameter of the bore of your cylinder must always be 0.5 - 1.0 mm smaller than that of the head gasket!
Suitable for all 2.0 TSI EA888 MQB Gen.3 engines with chain.
(Image similar)
With our compression calculator you can easily calculate the compression with different head gasket thicknesses. This allows you to quickly and easily find the right thickness for your engine.
