2.0L TSI Golf 7 GTI, TT 8S & A3 8V Chiptuning Software APR
- High boost
- Mehr Leistung
- Mehr Drehmoment
- Mehr Fahrspaß
- Description
- up to 310 hp
- torque 510 nm
- ECE Approved
- upgrade of other APR Hardware included
- Fits for
- Videos
- Questions about the product
- Reviews
- Blog Posts
- Accessories
- Cutsomers also bought
APR Stage 1 ECU Chiptuning Software for all 2.0L TSI EA888 Gen3 engines.
APR's Calibration Engineers spent months calibrating the engine management system, including many hours of chassis dyno development. With a thorough understanding of the ECU’s torque structure, APR’s Calibration Engineers properly increased engine load to produce more power and torque across the entire power band. APR’s ECU Upgrade increases boost pressure, optimizes ignition timing, cam timing, lambda and more to produce higher output!
APR’s ECU upgrades are one of the best horsepower-per-dollar modifications for the new 2.0T engine. The APR Stage I ECU Upgrade is designed to work without requiring other changes to the vehicle’s hardware. With the ECU Upgrade alone, APR’s Calibration Experts measured higher peak figures of 381 ft-lbs of torque and 316 horsepower with 93 AKI octane fuel. Large gains were seen throughout the power band, including an additional 114 ft-lbs of torque and 87 horsepower. Even higher figures were achieved using race fuel. For those looking for a more modest bump in horsepower and torque, lower output software is available. In both cases the increase in horsepower and torque directly translates to an exceptionally quicker vehicle. Using advanced GPS measuring devices and the local IHRA certified drag strip, APR’s engineers conducted several acceleration tests. During the quarter mile sprint, the APR Stage I equipped vehicle crossed the finish line 1.094 seconds quicker, with an exit speed 13.3 MPH faster!
The APR Stage II ECU Upgrade is designed to work with APR’s Exhaust Downpipe. When combined with APR’s Intake System, peak power and torque figures grew further to 336 horsepower and 404 ft-lbs of torque. The additional hardware allowed the turbo to spool faster and power carried better towards redline, resulting in up to an additional 90 ft-lbs of torque and 28 horsepower.
Features Stage 1 Software:
Please send your ECU to us after purchase.
Engine | Engine code |
---|
Engine | Engine code |
---|
Engine | Engine code |
---|
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHC | 230 hp (169 kW) |
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Accessories
Cutsomers also bought
APR Stage 1 ECU Chiptuning Software for all 2.0L TSI EA888 Gen3 engines.
APR's Calibration Engineers spent months calibrating the engine management system, including many hours of chassis dyno development. With a thorough understanding of the ECU’s torque structure, APR’s Calibration Engineers properly increased engine load to produce more power and torque across the entire power band. APR’s ECU Upgrade increases boost pressure, optimizes ignition timing, cam timing, lambda and more to produce higher output!
APR’s ECU upgrades are one of the best horsepower-per-dollar modifications for the new 2.0T engine. The APR Stage I ECU Upgrade is designed to work without requiring other changes to the vehicle’s hardware. With the ECU Upgrade alone, APR’s Calibration Experts measured higher peak figures of 381 ft-lbs of torque and 316 horsepower with 93 AKI octane fuel. Large gains were seen throughout the power band, including an additional 114 ft-lbs of torque and 87 horsepower. Even higher figures were achieved using race fuel. For those looking for a more modest bump in horsepower and torque, lower output software is available. In both cases the increase in horsepower and torque directly translates to an exceptionally quicker vehicle. Using advanced GPS measuring devices and the local IHRA certified drag strip, APR’s engineers conducted several acceleration tests. During the quarter mile sprint, the APR Stage I equipped vehicle crossed the finish line 1.094 seconds quicker, with an exit speed 13.3 MPH faster!
The APR Stage II ECU Upgrade is designed to work with APR’s Exhaust Downpipe. When combined with APR’s Intake System, peak power and torque figures grew further to 336 horsepower and 404 ft-lbs of torque. The additional hardware allowed the turbo to spool faster and power carried better towards redline, resulting in up to an additional 90 ft-lbs of torque and 28 horsepower.
Features Stage 1 Software:
- up to 310 hp
- torque 510 nm
- ECE Approved
- upgrade of other APR Hardware included
Please send your ECU to us after purchase.
Engine | Engine code |
---|
Engine | Engine code |
---|
Engine | Engine code |
---|
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHC | 230 hp (169 kW) |
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Engine | Engine code |
---|
Engine | Engine code |
---|---|
2.0 TFSI (EA888 Gen. 3) | CHHB | 220 hp (162 kW) |
Accessories
Cutsomers also bought