High strength I-Beam connecting rod for all 2.0L TFSI engines
144 x 21 mm I-Beam connecting rod for all 2.0L TFSI EA113 engines: Perfect for the performance upgrade of your Audi S3, Golf VI GTI and more! These connecting rods provide top performance up to 1000 hp!
Since the original 2.0L TFSI conrods cannot withstand this extreme load, you should use our conrods for the racing feeling from 300 HP. Due to their I-beam construction, these connecting rods withstand high pressure loads and offer good tensile strength. Thus extreme performances are possible, which make the tuning heart beat faster!
With a weight of just 590 grams per connecting rod (including bolts), they are extremely light with very high stability. They are milled from the solid and stand for absolute safety. All ZRP connecting rods are precisely angled and tested.
Features of the I-Beam conrod:
for 21 mm piston pins like e.g. in BYD, BHZ or CDL
riffle drilled
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 HP
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions: 144 x 21 mm
Weight per connecting rod with screws only 590 grams
These rods can not be used with OEM pistons
You can find further information on the appropriate motor codes here.
High strength I-Beam connecting rod for all 2.0L TFSI engines
144 x 21 mm I-Beam connecting rod for all 2.0L TFSI EA113 engines: Perfect for the performance upgrade of your Audi S3, Golf VI GTI and more! These connecting rods provide top performance up to 1000 hp!
Since the original 2.0L TFSI conrods cannot withstand this extreme load, you should use our conrods for the racing feeling from 300 HP. Due to their I-beam construction, these connecting rods withstand high pressure loads and offer good tensile strength. Thus extreme performances are possible, which make the tuning heart beat faster!
With a weight of just 590 grams per connecting rod (including bolts), they are extremely light with very high stability. They are milled from the solid and stand for absolute safety. All ZRP connecting rods are precisely angled and tested.
Features of the I-Beam conrod:
for 21 mm piston pins like e.g. in BYD, BHZ or CDL
riffle drilled
high strength milled from solid material
suitable for extreme performance increases up to approx. 1000 HP
extremely light and very stable
Magnaflux inspected
4 pieces per set
Dimensions: 144 x 21 mm
Weight per connecting rod with screws only 590 grams
These rods can not be used with OEM pistons
You can find further information on the appropriate motor codes here.
